— 245mm × 195mm · free, no signup
20 oz Skinny Tumbler wrap template
A true-size wrap template for the 20 oz Skinny Tumbler, measured off a real blank — 245mm around the widest engraveable point by 195mm of engraveable height.
3 formats · annotated or blank · straight-sided
— free template, no signup
245MM × 195MM
True-size 20 oz Skinny Tumbler wrap template — 245mm around by 195mm of engraveable height, plus 40mm of overdraw on each side so you can design past the seam. Free for commercial use, no attribution.
Section heights, per-band circumferences, centre and quarter lines, handle keepouts.
- SVG.svg↓LightBurn · xTool · Illustrator · Inkscape · Cricut
- LightBurn.lbrn2↓LightBurn 1.2+
- xTool.xs↓xTool Creative Space
LightBurn and xTool files put every guide on the cut layer — switch that layer’s output off before you run the job. Files download from tumblerforge.makerfoundryco.com.
— the numbers
20 oz Skinny Tumbler wrap dimensions
- Wrap width (circumference)245.0 mm
- Engraveable height195.0 mm
- Overdraw margin40 mm each side
This cup is a straight cylinder, so the wrap is a true rectangle — no taper compensation needed.
— three formats
Which file do I want?
SVG.svg
LightBurn · xTool · Illustrator · Inkscape · Cricut
True physical size — 1 unit = 1mm.
LightBurn.lbrn2
LightBurn 1.2+
Native .lbrn2 project. Guides land on the cut layer — toggle it off before you burn.
xTool.xs
xTool Creative Space
Native .xs project. Guides land on the cut layer — toggle it off before you burn.
— every size in one zip
All 8 wrap templates, all three formats, plus a README listing every dimension. That one is the only place TumblerForge asks for an email, and the form lives on the app — the pack comes back to you from there, not from this page.
the individual templates above need no email